Onorato Landscaping: The #1 Ridgewood, NJ Paver Driveways

A Paver Driveway can last up to 6 years, much longer than asphalt or concrete. These driveways are built on a 12″ compacted base material, so they will not shift. Moreover, pavers are made of clay or concrete and oven-cured, making them extremely durable and resistant to wear and tear. They also require virtually no maintenance and can even withstand the pressure of your car! Here’s how to care for your Paver Driveway:

Depending on the size of your driveway, you can choose from various paving materials, including Belgian blocks. Belgian blocks are similar to cobblestones but are larger, resulting in a rustic antique look. Generally, you will spend about $6,100 to $24,350 for a full driveway. The price range will vary depending on the size and type of paver you choose, but you can expect to pay between $10 to $40 per square foot. Permeable Paver Driveways are also a great choice for those looking for a greener driveway, as they allow water to pass through.

A Paver Driveway installation starts with the removal of any existing paving. Then, a base of gravel is laid, which is compacted thoroughly. Then, sand is laid on top of this. A basic driveway will have an 1 inch layer of sand over four to six inches of gravel, with a more substantial base of 10 to 12 inches. The base of the driveway should be level, with a slight slope to avoid water puddles.

After the installation is complete, the driveway will look beautiful and last for decades. If you live in a cold climate, you should consider concrete instead of pavers, as concrete is less likely to crack from freeze-thaw cycles. Gravel driveways are more affordable, but they require a lot of maintenance. Regular sweeping and replenishing with new gravel will help keep your driveway looking beautiful. Once your driveway is complete, you will be proud of your hard work!

The cost to install pavers in a driveway can range from $5,500 to $30,000. The exact amount will depend on the size of your driveway, the type of pavers used, and whether you choose to install a stone or concrete paver driveway. Generally, driveways cost between $14,000 and $19,000 per square foot. However, there are many DIYers who can save a considerable amount of money. If you do it yourself, you can save anywhere from ten to thirty percent on labor.

Installing a Paver Driveway requires more support than a concrete patio. In order to withstand the weight of a car, a paver driveway will need concrete reinforcement along the edges. Additionally, paver driveways often require a concrete bond beam where the hardscape meets a softscape. These extras, however, can raise the cost of installation. So, make sure to check with your contractor before you install a Paver Driveway.

Pavers are usually sealed after installation to protect them from weather, stains, and rot. To seal the pavers, you must dampen the base surface before compaction. Once the pavers are laid, the next step is to spread a layer of bedding sand on top of them. If you are using permeable pavers, you can use a polymeric joint sand or carpet. Make sure to use the correct type of sealant because some pavers are porous and could fail to adhere to the underlying sand.

If you’re building a new driveway, you’ll have to take into account the cost of construction. The cost of installing a Paver Driveway can add up to 30% to the overall cost of the project. But, there are some benefits of a Paver Driveway that you may not have considered before. It’s easy to get started! Just check with your local building code for requirements. You might even be subjected to homeowner associations’ rules and regulations.

When you have a Paver Driveway installed, you can rest assured that your investment will last for many years to come. The installation process is relatively quick, taking between three and ten days. And the result is a beautiful driveway for many years. If you’re planning to use your driveway for many years, then this is the right choice for you! It’s not only easy to care for a Paver Driveway, but it’s also very durable.

The average cost of a Paver Driveway varies from $6,910 to $21,600, depending on the size of the driveway. The cost per square foot will vary, however, depending on the type of material, the shape of the driveway, and its location. If you decide to opt for a Paver Driveway, make sure to choose a durable material that can withstand the pressure of multiple cars. Alternatively, choose a different driveway material if you are worried about shifting.